6-23
Using Various Functions > Functions
Print Override
Suspends the current job and gives a new job top priority.
The suspended job resumes after the other job is finished.
(Value: [Off] / [On])
Quiet Mode
Lower print and scan speed for quiet processing.
Select this mode when the running noise is uncomfortable.
It is possible to set the use of Quiet Mode for each function, such as copying and sending.
(Value: [Off] / [On])
Skip Blank Page
When there are blank pages in a scanned document, this function skips the blank pages and prints only pages
that are not blank.
Blank pages can be set as pages that include ruled lines and a small number of characters.
The machine detects blank pages, saving unnecessary printing without the need to check for blank pages in the document.
• This function is not available if current job was an override.
• Print override may not be available depending on the status of the current print job and memory usage.
• The processing speed will be slower than normal when in Quiet Mode.
• This cannot be used when [Prohibit] is set for "Each Job".
Each Job (page 8-50)
Item Description
Off Everything, including blank pages, is scanned.
On Blank+Ruled Line Blank pages and pages that include ruled lines are judged to be blank pages.
Blank Pages Only Blank pages only are judged to be blank pages.
Blank+Some Text
Blank pages and pages that include a small amount of text are judged to be blank pages.
The originals with punched holes or originals printed on a colored substrate may not be recognized as blank pages.
To Next Page
Loading...
