5-23
Operation on the Machine > WSD Scan
Executing WSD scan
WSD Scan saves images of originals scanned on this machine as files on a WSD-compatible computer.
1
Select the [Send] key.
2
Place the originals.
3
Display the screen.
[] [] key > [WSD Scan] > [OK] key
4
Scan the originals.
Procedure using this machine
1 [] [] key > [From Oper. Panel] > [OK] key
2 Select the destination computer, and select the [OK] key.
You can view information on the selected computer by selecting [Detail].
3 Select the [Function Menu] key to set the type of original, file format, etc., as desired.
4 Press the [Start] key.
Sending begins and the software installed on the computer is activated.
Procedure from Your Computer
1 [] [] key > [From Computer] > [OK] key
2 Use the software installed on the computer to send the images.
• To use WSD Scan, confirm that the computer used for WSD scanning and the machine is network-connected,
and "WSD-SCAN" is set to [On] in the network settings.
WSD-SCAN (page 8-16)
• For information on operating the computer, refer to the computer's help or the operation guide of your
software.
• When transmitting using wireless LAN, select the interface dedicated to the send function in advance.
Primary Network (page 8-21)
Loading Originals (page 5-2)
To Next Page
Loading...
