9-14
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Managing the Users to Scan Using WIA
The following WIA driver settings are necessary to manage the users that use WIA for scanning. Instructions are
based on interface elements as they appear in Windows 10.
1
Display the screen.
1 Click [Start] button on the Windows, and then select [Windows System], [Control Panel]. Click the
search box in the Control Panel, and type "Scanner" in there. Select [View scanners and cameras] in
the search list. The Scanners and Cameras screen is displayed.
2 Select the same name as this machine from WIA Drivers, and press [Properties].
2
Configure the settings.
1 Select the checkbox beside [Authentication] on the [Settings] tab, and enter Login User Name and
Password.
2 Click [OK].
In Windows 8.1, click [Search] in charms, and enter "Scanner" in the search box. Click [View scanners and
cameras] in the search list then the Scanners and Cameras screen appears.
To Next Page
Loading...
