Kyocera ECOSYS MA4500x

9-41
User Authentication and Accounting (User Login, Job Accounting) > Using Job Accounting
Apply Limit
This specifies how the machine behaves when the counter has reached the limit of restriction. The processing is
as follows:
1
Display the screen
1 [System Menu/Counter] key > [ ] [ ] key > [User/Job Account] > [OK] key
2 [] [] key > [Job Account.Set.] > [OK] key > [ ] [ ] key > [Default Setting] > [OK] key > [ ] [ ] key >
[Apply Limit] > [OK] key
2
Configure the settings
[] [] key > [Immediately], [Subsequently] or [Alert Only] > [OK] key
Copier/Printer Count
You can select how the copying and printing page counts are shown - either the total of both or each of copying
and printing individually. The selection may influence restriction on the count and count method. For details,
refer to the following:
1
Display the screen.
1 [System Menu/Counter] key > [ ] [ ] key > [User/Job Account] > [OK] key
2 [] [] key > [Job Account.Set.] > [OK] key > [ ] [ ] key > [Default Setting] > [OK] key > [ ] [ ] key >
[Copy/Print Count] > [OK] key
2
Configure the settings
[] [] key > [Split] or [Total]] > [OK] key
Item Descriptions
Immediately Job stops when the counter reaches its limit.
The next job will be prohibited in sending or in storing in the box.
Subsequently Printing/scanning of the job continues but the subsequent job will be rejected.
Alert Only Job continues while displaying an alert message.
NOTE
If the User Authentication screen appears, log in with a user who has the privilege to configure this
setting. If you do not know your login User Name or Password, please contact your Administrator.
NOTE
If the User Authentication screen appears, log in with a user who has the privilege to configure this
setting. If you do not know your login User Name or Password, please contact your Administrator.