Kyocera ECOSYS MA4500x

9-18
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Group Auth. (Group Authorization Settings)
Set restrictions of the machine usage by each individual group registered in the authentication server.
Group Authorization
1
Display the screen.
1 [System Menu/Counter] key > [ ] [ ] key > [User/Job Account] > [OK] key
2 [] [] key > [User Login Set.] > [OK] key
2
Configure the setting.
[] [] key > [Group Auth.] > [OK] key > [ ] [ ] key > [Off] or [On] > [OK] key
NOTE
• To use the group authorization settings, [Netwk Authentic.] must be selected for the authentication
method in "Enabling User Login Administration". Select "On" for "LDAP" in "Protocol Settings".
Enabling User Login Administration (page 9-3)
ProtocolSettings (page 8-14)
• Setting to use group authorization is performed from the operation panel. The groups should be registered
with Command Center RX.
Command Center RX User Guide
NOTE
If the User Authentication screen appears, log in with a user who has the privilege to configure this
setting. If you do not know your login User Name or Password, please contact your Administrator.