Kyocera ECOSYS MA4500x

8-14
Setup and Registration (System Menu) > System Menu
ProtocolSettings
Configure protocol settings.
Item Description
NetBEUI Selects whether to receive documents using NetBEUI.
*1
Value: Off, On
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [NetBEUI] is set to [On].
Wi-Fi
*2
Wired Network
SNMPv3 Select whether to communicate using SNMPv3.
*1
Value: Off, On
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [SNMPv3] is set to [On].
Wi-Fi
*2
Wired Network
FTP (Server) Select whether to receive documents using FTP.
*1
Value: Off, On
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [FTP (Server)] is set to [On].
Wi-Fi
*2
Wired Network
FTP (Client) Select whether to send documents using FTP. When selecting [On], set the FTP Port
Number. The default port number is 21.
Value: Off, On (Port Number: 1 to 65535)
SMB Select whether to send documents using SMB. When selecting [On], set the SMB
default Port Number. The default port number is 445.
Value: Off, On (Port Number: 1 to 65535)
SNMP Select whether to communicate using SNMP.
*1
Value: Off, On
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [SNMP] is set to [On].
Wi-Fi
*2
Wired Network
SMTP Select whether to send E-mail using SMTP.
Value: Off, On
POP3 Select whether to receive E-mail using POP3.
Value: Off, On
RAW Port Select whether to receive documents using Raw Port.
*1
Value: Off, On
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [RAW Port] is set to [On].
Wi-Fi
*2
Wired Network