Kyocera ECOSYS MA4500x

8-13
Setup and Registration (System Menu) > System Menu
Wired Netwk. Set
Configure wired network settings.
Bonjour
IP Filter (IPv4)
IP Filter (IPv6)
IPSec
Item Description
TCP/IP Settings For details on setting value.
TCP/IP Settings (page 8-11)
LAN Interface Specify the settings for the LAN interface to be used.
Value: Auto, 10Base-Half, 10Base-Full, 100Base-Half, 100Base-Full, 1000Base-T
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description
Available Net. Select whether to use Bonjour.
Value: Off, On
Wi-Fi Direct
*1
*1 Displayed only when the wireless network function is available on the machine.
Set whether to enable this function for each network.
Value: Disable, Enable
Wi-Fi
*1
Wired Network
Item Description
IP Filter (IPv4) Make this setting when you use IP Filter (IPv4).
Value: Off, On
Item Description
IP Filter (IPv6) Make this setting when you use IP Filter (IPv6).
Value: Off, On
Item Description
IPSec Make this setting when you use IPSec.
Value: Off, On