Kyocera ECOSYS MA4500x - Page 301

8-15
Setup and Registration (System Menu) > System Menu
LPD Selects whether to receive documents using LPD.
*1
Value: Off, On
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [LPD] is set to [On].
Wi-Fi
*2
Wired Network
IPP Selects whether to receive documents using IPP. To use the IPP protocol, select [Not
Secure (IPP&IPPS)] on IPP Security under Security Settings from the Command
Center RX. The default port number is 631.
*1
Value: Off, On (Port Number: 1 to 32767)
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [IPP] is set to [On].
Wi-Fi
*2
Wired Network
IPP Over TLS Select whether or not to use IPP over TLS.
*1, *3
Value: Off, On (Port Number: 1 to 32767)
NOTE
When selecting [On], it also requires a certificate for TLS. the default certificate is the
self-certificate of the machine.
Command Center RX User Guide
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [IPP Over TLS] is set to [On].
Wi-Fi
*2
Wired Network
HTTP Select whether to communicate using HTTP.
*1
Value: Off, On
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [HTTP] is set to [On].
Wi-Fi
*2
Wired Network
HTTPS Select whether to communicate using HTTPS.
*1, *3
Value: Off, On
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [HTTPS] is set to [On].
Wi-Fi
*2
Wired Network
LDAP Select whether to use LDAP.
Value: Off, On
Item Description