Kyocera ECOSYS MA4500x

8-16
Setup and Registration (System Menu) > System Menu
ThinPrint Select whether to use ThinPrint. To use the Thin Print protocol, set the protocol to
[On]. The default port number is 4000.
*1, *3
Value: Off, On (Port Number: 1 to 32767)
NOTE
This function is displayed only when the optional ThinPrint Option is activated.
Thin Print over TLS To use the Thin Print over TLS protocol, set [Thin Print Over TLS] to [On].
*1, *3
Value: Off, On
NOTE
• This function is displayed when [ThinPrint] is set to [On].
• When selecting [On], it also requires a certificate for TLS. The default certificate is
the self-certificate of the machine.
Command Center RX User Guide
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [ThinPrint] is set to [On].
Wi-Fi
*2
Wired Network
WSD-SCAN Select whether to use WSD Scan.
*1
Value: Off, On
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [WSD-SCAN] is set to [On].
Wi-Fi
*2
Wired Network
WSD-PRINT Set whether to use our proprietary web services. WIA driver, TWAIN driver and
Network FAX driver use this Enhanced WSD web service.
*1
Value: Off, On
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [WSD-PRINT] is set to [On].
Wi-Fi
*2
Wired Network
Enhanced WSD Set whether to use our proprietary web services.
*1
Value: Off, On
NOTE
Selecting [Off] will disable the functionality of WIA, TWAIN, and Network FAX driver.
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Enhanced WSD] is set to [On].
Wi-Fi
*2
Wired Network
Item Description