5-14
Operation on the Machine > Sending Document via E-mail
5
Select the functions.
Select the [Function Menu] key to select the send functions to use.
6
Press the [Start] key.
Sending starts.
Send (page 6-4)
• [EmailEncryptedTX] and [DigitalSignature] appear when setting S/MIME on the Command Center
RX.
Command Center RX User Guide
• When using [EmailEncryptedTX] and [DigitalSignature], specify the E-mail addresses which have
encryption certificate, from the address book. The directly-entered address can not be
configured these functions. When entering E-mail address from the operation panel, you can not
use these functions.
To Next Page
Loading...
