5-18
Operation on the Machine > Sending Document to Folder on an FTP Server (Scan to FTP)
5
Confirm the information.
The connection confirmation screen appears. Select [Yes] to check the connection and [No] to not check it.
"Connected." appears when connection to the destination is correctly established. If "Cannot connect."
appears, review the entry.
To send to multiple destinations, select the [Confirm/Add Destination] key.
Destinations can be changed later.
6
Select the functions.
Select the [Function Menu] key to select the send functions to use.
7
Press the [Start] key.
Sending starts.
If [Prohibit] is set to “Broadcast”, multiple destinations cannot be entered.
Broadcast (page 8-46)
Checking and Editing Destinations (page 5-31)
Send (page 6-4)
To Next Page
Loading...
