7-15
Status/Job Cancel > Device/Communication
"Wi-Fi Direct"
This function is displayed when the wireless network function is available on the machine.
• Select [ ] [ ] key > [PushButton Setup] > [OK] key, and execute the push button of the device you want
to connect to start the connection to the machine.
• Select [ ] [ ] key > [Detail Info] > [OK] key, information on the device that is connected by Wi-Fi Direct
appears.
• Select [ ] [ ] key > [ConnectionStatus] > [OK] key > [ ] [ ] key > [ConnectedDevices] > [OK] key to
display the list of connected devices.
• Select [ ] [ ] key > [ConnectionStatus] > [OK] key > [ ] [ ] key > [DisconnectAll] > [OK] key to
disconnect all devices.
"Option Network"
The connection status of the optional Network Interface Kit is displayed.
"Security"
You can check the security information on the machine.
To Next Page
Loading...
