Kyocera ECOSYS MA4500x - Page 326

8-40
Setup and Registration (System Menu) > System Menu
RAM Disk Mode
[System Menu/Counter] key > [ ] [ ] key > [Common Settings] > [OK] key > [ ] [ ] key > [RAM Disk Mode] >
[OK] key
Optional Memory
[System Menu/Counter] key > [ ] [ ] key > [Common Settings] > [OK] key > [ ] [ ] key > [Optional Memory] >
[OK] key
Disp. Status/Log
[System Menu/Counter] key > [ ] [ ] key > [Common Settings] > [OK] key > [ ] [ ] key > [Disp. Status/Log] >
[OK] key
NOTE
This function will not be displayed when the optional SSD is installed.
Item Description
RAM Disk Mode A RAM disk can be created and its size can be set.
Creating a RAM disk makes it possible to print from a Job Box.
Value
RAM Disk Mode: Off, On
RAM Disk Size: The setting range varies depending on the amount of memory
installed and the option memory usage setting.
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description
Optional Memory When optional memory is installed, select the memory allocation scheme based on the
application in which you are using the equipment.
Value: Normal, Printer Priority, Copy Priority
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description
Disp. Status/Log Set the display method of the Status/Log.
JobsDetailStatus Value: Show All, My Jobs Only, Hide All
Jobs Log Value: Show All, My Jobs Only, Hide All
FAX Log
*1
*1 Only on products with the fax function installed.
Value: Show All, Hide All