Kyocera TASKalfa 181 User Manual (English)

Other manuals for Kyocera TASKalfa 181

Service Manual355 pages

User Guide93 pages

Installation Guide20 pages

Questions and Answers:

M
martinezdylanAug 26, 2025
What to do if Kyocera TASKalfa 181 says 'Memory Full'?
- X
  xcurryAug 26, 2025
  If your Kyocera All in One Printer displays 'Memory Full', you have several options: * Press the Enter key and select Yes to transmit the documents that have already been completely scanned. * Select No to completely cancel the transmission. If you do not press the Enter key, the Auto Clear function will erase all data from memory after a certain time. After canceling, you can try the transmission again once memory is available.
A
Alexis EdwardsAug 26, 2025
What does 'Add toner' mean on Kyocera TASKalfa 181?
- D
  Derrick PerezAug 27, 2025
  The 'Add toner' message on your Kyocera All in One Printer indicates that there is insufficient toner left in the indicated toner container, or the toner container has run out of toner.
J
johnriveraAug 27, 2025
What does 'Misfeed in DP.' mean on Kyocera TASKalfa 181?
- R
  Ronald SolisAug 27, 2025
  The message 'Misfeed in DP.' on your Kyocera All in One Printer indicates that you should remove the original(s).
K
Kim HillAug 27, 2025
Why does my Kyocera All in One Printer keep jamming paper?
- M
  Michael NormanAug 27, 2025
  Paper jams in your Kyocera All in One Printer can occur for several reasons: * The paper might not be loaded correctly. * The paper may not be a supported type or is not in good condition, in which case you should remove the paper, turn it over, and reload it. * The paper could be curled, folded, or wrinkled, so replace it with new paper. * There might be loose scraps or jammed paper in the machine; remove any jammed paper.
J
Jessica HarmonAug 27, 2025
Why is my Kyocera TASKalfa 181 not printing?
- C
  Christopher MurphyAug 27, 2025
  If your Kyocera All in One Printer is not printing, check the following: * Ensure the printer is plugged into an AC outlet. * Verify the main power switch is turned on. * Make sure the printer cable is securely connected. * If the printer cable was connected before powering on the machine, power cycle the printer. * If the machine is offline (Ready indicator is off), press the Print key, use U or V to select GO, and then press the Enter key.
C
Chad PattersonAug 28, 2025
How to fix light printouts on Kyocera TASKalfa 181 All in One Printer?
- M
  Matthew StantonAug 28, 2025
  If your Kyocera All in One Printer's printouts are too light, consider these solutions: * If in Auto Density mode, set the correct density level. * If in Manual Density mode, use the Image Quality key to set the correct density level. * Shake the toner container from side to side to distribute the toner evenly. * If prompted, replace the toner container. * Replace the paper if it is damp. * Disable EcoPrint mode.
M
Monica HenryAug 25, 2025
Why does my Kyocera TASKalfa 181 say 'Add Paper'?
- C
  Clinton MilesAug 25, 2025
  The 'Add Paper' message on your Kyocera All in One Printer indicates that the selected drawer is empty. Make sure to add paper to the drawer indicated in the message display. This message can also appear if one or more of the drawers are not properly set. Ensure all drawers are securely inserted into the machine.
P
Peter HessAug 29, 2025
How to clean Kyocera All in One Printer when printouts are dirty?
- L
  lwellsAug 29, 2025
  If your Kyocera All in One Printer produces dirty printouts, the platen or document processor may be dirty, so clean them. Alternatively, the transfer roller may be dirty; brush the transfer roller clean.
R
Rebecca OlsonAug 29, 2025
Why are the printouts from my Kyocera TASKalfa 181 All in One Printer wrinkled?
- L
  Lisa BurkeAug 29, 2025
  Wrinkled printouts from your Kyocera All in One Printer can be due to: * A dirty paper separator on the paper feed unit, so clean the paper separator. * Damp paper, so replace the paper with new paper. * Improper paper orientation, so change the orientation in which the paper is positioned.
M
Mrs. Wanda AdamsAug 30, 2025
What causes paper misfeed in Kyocera TASKalfa 181 All in One Printer?
- D
  Daniel WillisAug 30, 2025
  A paper misfeed, or paper jam, has occurred in your Kyocera All in One Printer. The location of the jam is indicated on the message display. Leave the main power switch on and follow the appropriate procedure to remove the jammed paper.

Kyocera TASKalfa 181 Specifications

General

Print Technology	Laser
Type	Monochrome
Print Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Manual
Memory	64 MB
Functions	Print, Copy, Scan
Print Speed	18 ppm
Copy Speed	18 cpm
Paper Capacity	250 sheets
Connectivity	USB 2.0
Supported Operating Systems	Linux