What to do if my Kyocera TASKalfa 181 displays 'Paper Misfeed'?
If your Kyocera All in One Printer displays 'Paper Misfeed', you should remove the jammed paper from the fax machine, ensuring no loose scraps are left behind.
What does 'Load XX paper in cass.' mean on my Kyocera All in One Printer?
The 'Load XX paper in cass.' message on your Kyocera All in One Printer means that you need to load paper of the size indicated in the message display. This can occur because the Fixed Size mode is selected in the Paper Feed Selection setting or because the sizes of the received documents and the paper in the selected drawer are not compatible for printing. Load paper of the same size as that of the received documents.
What to do if Kyocera TASKalfa 181 says 'Memory Full'?
If your Kyocera All in One Printer displays 'Memory Full', you have several options: * Press the Enter key and select Yes to transmit the documents that have already been completely scanned. * Select No to completely cancel the transmission. If you do not press the Enter key, the Auto Clear function will erase all data from memory after a certain time. After canceling, you can try the transmission again once memory is available.
What does 'Add toner' mean on Kyocera TASKalfa 181?
The 'Add toner' message on your Kyocera All in One Printer indicates that there is insufficient toner left in the indicated toner container, or the toner container has run out of toner.
What does 'Misfeed in DP.' mean on Kyocera TASKalfa 181?
The message 'Misfeed in DP.' on your Kyocera All in One Printer indicates that you should remove the original(s).
Why does my Kyocera All in One Printer keep jamming paper?
Paper jams in your Kyocera All in One Printer can occur for several reasons: * The paper might not be loaded correctly. * The paper may not be a supported type or is not in good condition, in which case you should remove the paper, turn it over, and reload it. * The paper could be curled, folded, or wrinkled, so replace it with new paper. * There might be loose scraps or jammed paper in the machine; remove any jammed paper.
Why is my Kyocera TASKalfa 181 not printing?
If your Kyocera All in One Printer is not printing, check the following: * Ensure the printer is plugged into an AC outlet. * Verify the main power switch is turned on. * Make sure the printer cable is securely connected. * If the printer cable was connected before powering on the machine, power cycle the printer. * If the machine is offline (Ready indicator is off), press the Print key, use U or V to select GO, and then press the Enter key.
How to fix light printouts on Kyocera TASKalfa 181 All in One Printer?
If your Kyocera All in One Printer's printouts are too light, consider these solutions: * If in Auto Density mode, set the correct density level. * If in Manual Density mode, use the Image Quality key to set the correct density level. * Shake the toner container from side to side to distribute the toner evenly. * If prompted, replace the toner container. * Replace the paper if it is damp. * Disable EcoPrint mode.
What to do if my Kyocera TASKalfa 181 All in One Printer says 'Add paper in cassette'?
If your Kyocera All in One Printer displays 'Add paper in cassette', it means the print data does not match the size or type of paper in the cassette. To resolve this, press the Paper Selection key to select the desired paper source, and then press the Enter key.
How to clean Kyocera All in One Printer when printouts are dirty?
If your Kyocera All in One Printer produces dirty printouts, the platen or document processor may be dirty, so clean them. Alternatively, the transfer roller may be dirty; brush the transfer roller clean.
General| Print Technology | Laser |
|---|---|
| Type | Monochrome |
| Print Resolution | 600 x 600 dpi |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Duplex Printing | Manual |
| Memory | 64 MB |
| Functions | Print, Copy, Scan |
| Print Speed | 18 ppm |
| Copy Speed | 18 cpm |
| Paper Capacity | 250 sheets |
| Connectivity | USB 2.0 |
| Supported Operating Systems | Linux |
Instructions for loading various paper types into cassettes and MP tray.
Procedures for placing originals on the platen or in the document processor.
Guide to printing documents from computer applications.
Steps for setting up the machine for network printing.
Step-by-step guide for replacing toner and waste toner.
A table listing common symptoms, checkpoints, and corrective actions.
Guidance on interpreting and resolving displayed error messages.
Detailed instructions for clearing paper jams in various machine locations.
To Next Page
