User Guide
Leviton D4200 LCD Ver 2.0 Architectural Lighting Controller Page 30 of 80
• Dimmer Readback:
• Double Bump
: This applies to the:
• OFF Button- If turned “OFF” double bumping the button will
take it to it’s User setting while bypassing the set fade rate. If
turned “ON”, it will bypass the fade rate while going to all
Zones at zero output.
• MAX Button - If turned “OFF” double bumping this button this
will take it to it’s User setting while bypassing the set fade rate.
If turned “ON”, it will bypass the fade rate while going to all
Zones at full output.
• LCD Backlight:
When turned on the unit’s LCD Backlight will
dim to a half bright level after a minute of no use.
• Time Master:
If turned on, this will set the particular unit as the
Time Master. Every so often during a day, this unit will
broadcast a time setting that all other LCD stations on the
network will synchronize to.
• Previous Code Compatibility:
Allows the LCD station to work
with Entry Stations that have 1.xx code. This is more of a
concern if a LCD station is upgraded to new code, but the entry
stations are not.
• IR Control
: Allows the user to select if the IR port is active or
disabled. On indicates that the IR port is active.
MISC. SETTINGS:
FLAGS= r b L T o I
To Next Page
Loading...
