User Guide
Leviton D4200 LCD Ver 2.0 Architectural Lighting Controller Page 49 of 80
Setting the date and time causes the unit to become the
“Time Master” if the option to enable this feature is
configured in the Misc. Settings Menu.
The internal time is kept in “standard” time.... when the
Daylight Saving feature in enabled and it is “in Daylight
Saving”, the displayed time is shown in Daylight Saving
Mode with the “a” of “am” or the “p” of “pm” shown in
UPPER case (“A” or “P”) if in 12 Hour Mode. If in 24 Hour
mode, a lower case “d” is appended to the time to
confirm daylight saving mode. Standard time is indicated
by displaying a “s”.
Editing The Daylight Saving Time Region
This new menu allows the installer to edit which region of the world
to use for the Daylight Saving feature. The choices are:
• OFF
• North America
(Adds 1 hour to displayed time from 1st Sunday in
April to Last Sunday in October at 2:00am).
• European Union (Adds 1 hour to displayed time from Last Sunday of
March at 1:00am until Last Sunday of October at 1:00am
Step 1: Press the Menu/Cancel button.
Step 2: Press the Up and Down buttons until
DAYLIGHT SAVING? flashes on the LCD display.
Step 3: Press the Select/Save button.
The
DAYLIGHT SAVING
field flashes.
Step 4: Press the Select/Save button again.
Step 5: Press the Up and Down buttons until your
choice is flashing.
Step 6: Press the Select/Save button to record the change.
To Next Page
Loading...
