Leviton D4200 - Enabling the Record Lock; Enabling the Station Lock

User Guide
Leviton D4200 LCD Ver 2.0 Architectural Lighting Controller Page 52 of 80
To enable or disable the Record Lock:
Step 1: Press the Menu/Cancel button.
Step 2: Press the Up and Down buttons until RECORD
LOCK= flashes on the LCD display.
Step 3: Press the Select/Save button.
The current value flashes.
Step 4: Press the Up and Down buttons to change the
value.
Press Clear to change the value to OFF .
Step 5: Press the Select/Save button to save the value.
RECORD LOCK=
flashes again.
Step 6: Press the Menu/Cancel button to exit this menu.
Enabling the Station Lock
Be sure to set the Station Lock Code before enabling the
Station Lock.
To enable or disable the Station Lock:
Step 1: Press the Menu/Cancel button.
Step 2: Press the Up and Down buttons until STATION
LOCK= flashes on the LCD display.
Step 3: Press the Select/Save button.
The current value flashes.
Step 4: Press the Up and Down buttons to change the
value.
Press Clear to change the value to OFF .
Step 5: Press the Select/Save button to save the value.
STATION LOCK=
flashes again.
Step 6: Press the Menu/Cancel button to exit this menu.