User Guide
Leviton D4200 LCD Ver 2.0 Architectural Lighting Controller Page 1 of 80
Warnings
1: To be installed and/or used in accordance with appropriate
electrical codes and regulations.
2: To be installed by a qualified Electrician.
3: DO NOT CONNECT line voltage wires to low voltage terminals.
4: For best lamp life, lamp manufacturers recommend their
fluorescent lamps should be operated at full brightness for a
minimum or 100 hours before dimming is permitted. For best
results, lamp brands and types should not be intermixed on a
circuit
5: Disconnect power when servicing the dimmer, fixture or when
changing lamps.
6: Indoor use only.
7: TO AVOID FIRE, SHOCK OR DEATH: TURN OFF POWER AT
MAIN CIRCUIT BREAKER OR FUSE AND TEST THAT THE
POWER IS OFF BEFORE WIRING!
To Next Page
Loading...
