User Guide
Leviton D4200 LCD Ver 2.0 Architectural Lighting Controller Page 61 of 80
Checking Scene Names
You can check for a Scene name without initiating the Scene.
To Check the Scene Name:
Step 1: Press the CLEAR Button
Step 2: Immediately Press the SCENE button you are interested
in.
Step 3: To View another Scene name, Repeat from Step 1.
Recording a Scene
After adjusting individual lighting levels, you can record lighting levels
to a Scene.
Step 1: With the cover open, press and hold the Scene button you
want to record until the LCD display shows FADETIME.
The flashing number indicates the fade time in seconds.
Step 2: Press the Up and Down buttons beneath the
LCD display to adjust the fade time.
Step 3: Press the Right button to select the REC TO SCENE
option.
Step 4: Press the Up and Down buttons beneath the
LCD display to pick the Scene you wish to record.
Step 5: Press the Select/Save button to record the lighting levels
and fade time.
The LCD display shows
RECORDING SCENE TO S00
, with
S00
representing the Scene you chose.
To Next Page
Loading...
