EasyManua.ls Logo

Lexmark 4036-307 - Page 19

Lexmark 4036-307
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Diagnostic information 2-5
4036-307, -308
846 .06 Front calibration strip
insufficient dark area
Front excessive variability for
Mono, Red, Green, or Blue
See ” on page 4-20.
846 .07 Front magnification
exceeds limits
Rear excessive variability for
Mono, Red, Green, or Blue
See ” on page 4-20.
847 .00 Modem Failure The Configuration ID bit that
describes the devices modem
doesn’t match the actual modem
installed in the device.
Replace modem card
848 .00 Modem/Config ID
Mismatch
A device doesn’t have a modem
installed, even though its
Configuration ID indicates that a
modem should be present.
See 848.00 Modem/config ID
mismatch” on page 4-21.
848 .01 Modem/Config ID
Mismatch
A device has a modem installed,
but its Configuration ID indicates
that a modem shouldn’t be
present.
See 848.01 Modem/config ID
mismatch” on page 4-21.
849 .00 HD/Config ID Mismatch A device doesn’t have a hard
drive installed, even though its
Configuration ID indicates that a
hard drive should be present.
Replace hard drive
See 849.00 HD/config ID
mismatch” on page 4-21.
Error
code
Sub
codes
Displayed message Description Action

Table of Contents

Related product manuals