3-6 Service Manual
4036-307, -308
Configuration menu (CONFIG MENU)
Entering Configuration Menu
1. Turn off the printer.
2. Press and hold 2 and 6 buttons simultaneously.
3. Turn on the printer.
4. Release the buttons after 10 seconds.
Available menus
Note: Some menus are not available, depending on the configuration of the printer. For other menu items, see
he printer service manual.
Touch Exit Config Menu to exit the Configuration Menu and Resetting the Printer displays. The printer
performs a POR, and the printer returns to normal mode.
Panel See “Panel Menus” on page 3-7.
Format Fax Storage See “Format Fax Storage” on page 3-7.
ADF Edge Erase See “ADF Edge Erase” on page 3-7.
FB Edge Erase See “FB Edge Erase” on page 3-7.
Automatic Scanner Registration See “Automatic Scanner Registration” on page 3-8.
EVENT LOG (print log only) See “EVENT LOG” on page 3-3.
Jobs On Disk See “Jobs On Disk” on page 3-9.
Disk Encryption See “Disk Encryption” on page 3-10.
Wipe Disk See “Wipe Disk” on page 3-11.
Key Repeat Initial Delay See “Key Repeat Initial Delay” on page 3-12.
Key Repeat Rate See “Key Repeat Rate” on page 3-12.
Wiper Message See “Wiper Message” on page 3-12.
Exit
Config Men
To Next Page
Loading...
