Lexmark 4036-307 - Hard Disk Drive, A1 Board, Scanner Control Board, Power Supply Board, and Modem Board Removals

4-36 Service Manual
4036-307, -308
Hard disk drive, A1 board, scanner control board, power supply board, and modem
board removals
1. Remove the bottom plate. See “Bottom plate removal” on page 4-35.
2. Remove the component you want from within the MFD cage. See the following pages for the removals:
• CCD controller board
• A1 board
• Hard disk drive assembly
• Power supply assembly
• Modem card