8-4
Windows Software Reference (Single Chamber Mode)
Connect
Disconnect Start
Measurement
New Measurement
Charting
Settings
File Manager
Communication Menu
Connect
Opens the Connect dialog, where you can choose the serial (COM) port on the
computer to which the LI-8100A is connected, or enter the IP address of the
LI-8100A, if it is connected to a network.
The Internet Protocol (IP)
address is a unique number that
identifies a host (in this case, the
LI-8100A) connected to a
network. The address is
composed of a set of four
numbers (called octets), where
each octet ranges in value from
0 to 255. When entering an IP
address, the octets are
separated with a period. For
example, 192.168.100.2 is a
valid IP address.
Disconnect
Terminates communication between the Windows application software and the
LI-8100A.
Setup Menu
Chamber Measurement
Opens the Single Chamber Configuration window, where you can define the
measurement protocol, data logging options, flow rate, voltage inputs, and
chamber offset values. There are a number of tabbed pages associated with the
Chamber Configuration window; click on the tabs to open the other pages.
Note that there are 4 Configuration Categories in the upper lefthand corner of the
window; clicking on any of the categories changes the options in the main part of
To Next Page
Loading...
