8-16
Windows Software Reference (Single Chamber Mode)
Collecting Continuous CO
2
Concentration Data
1. Connect the 8100-405 as shown in Figure 2 of the 8100-405 Instruction
Manual.
2. Connect the intake tube to the Air In fitting on side panel of the LI-8100A
Analyzer Control Unit. Bev-a-line tubing and fittings are included in the spare
parts kit.
3. Attach the GPS receiver to the Analyzer Control Unit, or other suitable mount.
The 9981-211 Mounting Bracket is included for easy attachment to the
Analyzer Control Unit.
4. Start the Windows Application Software V4.x and above, and choose
Continuous Measurement from the Setup menu.
5. Choose the data values to be logged.
6. Choose the data values to be output via Ethernet or wireless communication
(optional).
7. Start the measurement. Enter a file name and the location to which to save the
file.
8. Add annotations (optional, see below).
To Next Page
Loading...
