9-2
Apple iOS Software Reference (Single Chamber Mode)
go to LI-COR's LI-8100A support page on the web at www.licor.com to see the
most current handheld recommendations.
For the purposes of this manual, descriptions and discussion for using the LI-8100A
with a handheld device will reference the Apple iOS software.
Handheld Software Requirements
The LI-8100APP is compatible with iPod Touch, iPhone, and iPad with iOS4.0 or
later, and with LI-8100A Windows
®
and instrument (embedded) software V4.0.0
or later. You will need to download the free LI-8100APP from Apple’s iTunes
®
store
or App Store
SM
, sync the device to add the app, connect to the LI-8100A with your
computer to record the IP address of the wireless card, and finally use that IP
address to connect via Wi-Fi with the iOS device. Complete setup instructions are
included with the wireless package, and are available on LI-COR’s web site at:
http://www.l ic or.co m/ 8100app-support
Accessing On-line Help
There are two ways to obtain on-line help in the LI-8100APP. Tap the Help menu
and choose Indicators to see a list of the indicators that may appear on the screen
when using the application. For example, if the @ indicator is visible on-screen, it
indicates that an active measurement is in progress. You can also tap on the
indicator itself to bring up a description.
To Next Page
