Using the LI-8150 Multiplexer
10-107
The 8100 Menu
Instrument Settings
Opens the Instrument Settings page, where you can view and/or edit the current
operating state of the LI-8100A.
Name: The instrument name to which the iOS device is connected. The
instrument name is limited to 30 characters. Files copied to a Compact Flash card
are put into a directory with this name.
Date: Current date, in YYYYMMDD.
Time: Current time, in HHMMSS.
Netw ork Parameters: The IP address of the wireless or Ethernet card in the
LI-8100A.
Automatic Restart: When enabled, allows the measurement to restart following a
power interruption to the instrument. This is not the default option, as it requires
that a hardware jumper be installed; see Section 2, “Automatic Restart Function”
for more information.
Chamber Error: Determines how an error condition affects the measurement; you
can choose to log the chamber error and continue the measurement, or log the
error and stop the measurement. Tap Send to enable this function.
To Next Page
Loading...
