Using the LI-8150 Multiplexer
10-113
while the other is enabled; changes will not take effect until data logging is stopped
and restarted, however. For example, if you are currently logging data to the PC,
you can configure the wireless output, but you must first stop logging data to the
PC before beginning wireless output with the new configuration.
The data values that can be output are as shown above at RS-232 Output.
Log Every
Sets the frequency at which to log data (1-20 seconds).
The Help Menu
Indicators
Opens the LI-8100 Indicators page, where you can view the definitions of
indicators that can appear on the screen.
To Next Page
Loading...
