EasyManua.ls Logo

LI-COR LI-8100A - Networking

LI-COR LI-8100A
396 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Windows Software Reference (Single Chamber Mode)
8-37
value of CO
2
or H
2
O. As data stream in, earlier data are dropped from the
average. The minimum is 1 second and the maximum is 20 seconds.
Click on Apply to send these values to the LI-8100A for implementation.
Networking
The LI-8100A can be connected to a PC or PDA via a wireless or wired network if
desired. The Remote Network Setup window allows you to configure networking
options for the LI-8100A.
Connecting to the LI-8100A on a Wireless Network
The LI-8100A is preconfigured for a peer-to-peer (ad-hoc) wireless 802.11b
network. An ad-hoc, or peer-to-peer network typically consists of a small number
of devices, each equipped with a wireless network interface card. Each device can

Table of Contents

Related product manuals