10-34
Using the LI-8150 Multiplexer
Connect
Disconnect Start
Measurement
New Measurement
Charting
Settings
File Manager
Communication Menu
Connect
Opens the Connect dialog, where you can choose the serial (COM) port on the
computer to which the LI-8100A is connected, or enter the IP address of the
LI-8100A, if the instrument is connected to a wireless network.
The Internet Protocol (IP)
address is a unique number that
identifies a host (in this case,
the LI-8100A) connected to a
network. The address is
composed of a set of four
numbers (called octets), where
each octet ranges in value from
0 to 255. When entering an IP
address, the octets are
separated with a period. For
example, 192.168.100.2 is a
valid IP address.
To Next Page
Loading...
