Using the LI-8150 Multiplexer
10-65
Press Start at any time to view the chart layout and begin displaying data. Note
that you must press Stop to make changes to the chart parameters, and then press
Start again to resume data display. Click on Save Chart to save the plot as
currently displayed in the window to a .bmp file. Click Print Chart to print the
currently displayed plot to your printer.
PC Data Logging
Opens the Local Data Logging dialog, where you can configure the real-time data
output options for collecting selected data records on your computer. By default,
log files are denoted with a .txt file extension.
Choose the frequency at which to log data (seconds), and the delimiter for the data
fields (tab or semicolon character). Use the Controls buttons to manually start or
stop data logging, independent of any measurement protocol that is currently
defined. You are prompted for a file name and destination for the log file. After
the Start button is pressed and data logging begins, you can enter comments in the
Mark Data field and click the Mark Data button to insert the comment into the data
To Next Page
Loading...
