9-18
Apple iOS Software Reference (Single Chamber Mode)
For example, you could specify a 90 second Obs. Length, 45 second Deadband,
Obs. Delay of 2 minutes, and Obs. Count of 3. This protocol could then be
repeated every hour for 240 hours (10 days). The resulting data set would include
240 measurements, with each measurement consisting of three 90-second
observations on the chosen port. The maximum number of repeats is 12000
(Indefinitely).
You can elect to turn off the flow pump between repeated measurements to
conserve battery life and extend the life of the pump by setting the ‘Flow Off
Between Repeats’ to ON.
Tap Send Update to begin the measurement.
To Next Page
Loading...
