iii
The product is marked with this symbol when it is necessary for you to refer to the manual or accompanying
documents in order to protect against damage to the product.
Warnings must be followed carefully to avoid bodily injury.WARNING
CAUTION Cautions must be observed to avoid damage to your equipment.
The
The product is marked with this symbol when a crush hazard is present.
product is marked with this symbol when a hazardous voltage may be present.
The product is marked with this symbol for a Chassis Ground connection.
Equipment markings:
Manual markings:
Warnings must be followed carefully to avoid bodily injury.WARNING
CAUTION Cautions must be observed to avoid damage to your equipment.
LI-COR products have been designed to be safe when operated in the manner described in this manual. The safety of
this product can not be guaranteed if the product is used in any other way than is specified in this manual.
NOTE Notes contain important information and useful tips on the operation of your equipment.
Note on Safety
NOTE: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio fequency energy and,
if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own
expense.
To Next Page
Loading...
