214325 147 Revision A
Figure 5.16: Combine Controls
1. Use HEADER SETTINGS key (A) to display HEADER
SENSITIVITY CHANGE page.
2. Use UP or DOWN keys (B) and (C) to adjust highlighted
item. The height sensitivity setting range is 0 (least
sensitive) to 250 (most sensitive) in increments of 10.
NOTE:
Adjustments take effect immediately. Use CANCEL key
to return to original settings.
3. Use HEADER SETTINGS key (A) to highlight next
changeable item.
4. Use ENTER key (D) to save changes and return to
monitor page. If there are no changes, screen will return
to monitor page after five seconds.
Figure 5.17: Height Sensitivity Change Page
SETTING UP AUTO HEADER HEIGHT CONTROL
To Next Page
Loading...
