MacDon FFT FD75 User Manual

FD75
FlexDraper
®®
Combine Header with
CA25 Combine Adapter
Unload and Assembly Instructions (North America)
214325 Revision A
2018 Model Year
Original Instruction
Featuring MacDon FLEX-FLOAT Technology™
The harvesting specialists.

MacDon FFT FD75 Specifications

General

Brand	MacDon
Model	FFT FD75
Category	Lawn and Garden Equipment
Language	English

Summary

Unloading and Assembly Instructions

Chapter 1: Safety

General Safety Precautions

Provides general farm safety precautions for machinery operation and personal protection.

Understanding Signal Words

Explains DANGER, WARNING, CAUTION signal words for hazardous situations.

Chapter 2: Unloading Header and Adapter

Unloading Header and Adapter from Trailer

Outlines the procedure for safely unloading headers and adapters from a trailer.

Lowering Header

Removing Shipping Stands

Chapter 3: Assembling Header and Adapter

Attaching Reel Lift Cylinders

Explains how to attach the reel lift cylinders to the header assembly.

Setting up Combine Adapter

Guides through the setup procedures for the combine adapter.

Attaching Header to Combine

Provides procedures for attaching the header to various combine models.

Chapter 4: Performing Predelivery Checks

Header Wing Balance and Float Adjustments

Auger to Pan and Draper Tension Checks

Knife and Draper System Checks

Reel and Header Levelness Checks

Chapter 5: Setting up Auto Header Height Control

AHHC System Overview and Voltage Requirements

New Holland Combines AHHC Setup (2014 & Earlier)

Combine-Specific AHHC Setup Procedures

Details AHHC setup, calibration, and sensitivity for Case IH, Challenger, and Gleaner models.

New Holland Combines AHHC Setup (2015 and Later)

John Deere Combines AHHC Setup

CLAAS Combines AHHC Setup

Chapter 6: Running up Header

Post Run-Up Adjustments and Checks

Chapter 8: Predelivery Checklist

Predelivery Inspection Items

Lists essential checks and adjustments required before machine delivery to customer.

Run-Up and Post Run-Up Procedures