List of Revisions
The following list provides an account of major changes from the previous version of this document.
Summary of Change
Location
The name Lexion changed to CLAAS—representing a
wider product range.
Throughout
Filler cap now includes flange head screws for better fit. 3.2.1 Installing Filler Cap, page 21
Added topic for removing filler plates from transition
frame when attaching to AGCO Class 7 or 8 combines.
Preparing Transition Frame: AGCO Combines, page 29
Harness MD #220337 superseded by MD #279753.
• Installing Reel Fore-Aft/Header Tilt Selector Switch
and Harness: CLAAS 500 Series, page 52
• Installing Reel Fore-Aft/Header Tilt Selector Switch
and Harness: CLAAS 700 Series, page 61
Deleted step as per product support feedback. 4.7.1 Checking Pointed Guard Hold-Downs, page 95
Modified instruction and image; header must be in full
smile mode.
4.8 Centering Reel, page 97
Moved procedure to keep reel topics together.
4.9 Measuring and Adjusting Reel Clearance to
Cutterbar, page 98
Added reel cam checking topic.
4.9.3 Checking and Adjusting Reel Cam, page 101
Added topic for adjusting header level.
4.10 Checking and Adjusting Header Levelness, page
103
Removed Wing Balance chart. 4.12.2 Adjusting Wing Balance, page 115
Added topic for checking and adjusting the draper
tension.
4.14 Checking and Adjusting Feed Draper Tension,
page 121
Added header controls topic for Case 8010 combines. Setting Header Controls (Case 8010), page 150
• Added checking feed draper tension.
• Added note to install options before checking float.
• Moved Check header float ahead of Check wing
balance.
• Added remove all shipping wires.
8 Predelivery Checklist, page 295
214325 ii Revision A
To Next Page
Loading...
