MacDon FlexDraper FD130 - Model and Serial Number

Model and Serial Number
Record the model number, serial number, and model year of the header, combine float module, and
transport / stabilizer wheel option (if installed) in the spaces provided.
NOTE:
Right and left designations are determined from the operator’s position, facing forward.
1020884
A
Figure 2. Header, Left Side Endshield
FlexDraper
®®
Header
Header Model:
Serial Number:
Year:
The serial number plate (A) is located in the upper corner
on the left endsheet.
1020665
A
Figure 3. Float Module
Combine Float Module
Float Module
Model:
Serial Number:
Year:
The serial number plate (A) is located at the top left side
of the float module.
214683 ix Revision A