214683 552 Revision A
6.4 Header
6.4.1 Divider Latch Kit
Figure 6.12: Divider Latch
Divider latch kits attach to the endsheets. They allow for
quick removal and storage of endsheet divider cones and, if
required, reduce the transport width of the header.
Installation instructions are included in the kit.
MD #B6158
6.4.2 Stabilizer Wheels
Figure 6.13: Stabilizer Wheel
Stabilizer wheels help stabilize the header in field conditions
that would otherwise cause the header to bounce, resulting
in uneven cutting heights. Installation and adjustment
instructions are included in the kit.
Available as an attachment for use with 9.1 m, 10.7 m,
12.2 m, and 13.7 m (30 ft., 35 ft., 40 ft., and 45 ft.) headers.
MD #C1986
OPTIONS AND ATTACHMENTS
To Next Page
Loading...
