214683 363 Revision A
4.7 New Holland Combines
The FD1 Series FlexDraper
®
is compatible with the following New Holland combines:
Series Combine Model
920, 940, 960, 970, 980
CR 9020, 9040, 9060, 9065, 9070, 9080
6090, 7090, 8080, 8090, 9090
6.80, 6.90, 7.90, 8.90, 9.90, 10.90
840, 860, 870, 880
CX
8070, 8080, 8090
8080 Elevation, 8090 Elevation
4.7.1 Attaching Header to New Holland CR/CX Combine
DANGER
To avoid bodily injury or death from unexpected start-up of machine, always stop engine and remove key
from ignition before leaving operator’s seat for any reason.
Figure 4.120: Feeder House Locks
1. Ensure the handle (A) is positioned so the hooks (B)
can engage the float module.
HEADER ATTACHMENT/DETACHMENT
To Next Page
Loading...
