214683 152 Revision A
Figure 3.213: Case 8010 Combine Display
7. Select HDR HEIGHT/TILT (A). The SENSOR screen
displays.
Figure 3.214: Case 8010 Combine Display
8. Select LEFT SEN (A). The exact voltage is displayed.
Raise and lower the header to see the full range of
voltage readings.
Figure 3.215: Case 8010 Combine Display
9. If the sensor voltage is not within the low and high
limits, or if the range between the low and high limits is
insufficient, adjust the voltage limits. Refer to Adjusting
Voltage Limits: One-Sensor System, page 131.
OPERATION
To Next Page
Loading...
