INTRODUCTION
IMPORTANT INFORMATION
Read the Driver's
Handbook
The contents of this driver’s manual are
determined by the equipment, the
systems and the functions that the truck
has. Due to the VIN specic nature of
this manual the information should be
stored in the truck to which it belongs.
Please read through the driver’s manual
before you drive the truck for the rst
time. This is a good way to learn more
about the functions and equipment the
truck has, and to be able to use them
properly.
The table of contents in the front of the
manual gives you an overview of the
chapter structure and contents. In the
alphabetical index at the back you can
search directly for specic
characteristics or functions.
Premium Tech Tool™ (PTT)
Premium Tech Tool™ (PTT) is a
Windows-based diagnostic application
specially designed to test, calibrate and
program engine parameters. This
software supports all Mack trucks.
You can nd more information about
purchasing PTT and other hardware &
software components at
www.premiumtechtool.com.
NOTE
Support for Mack trucks may be limited
with model years 1998 and older.
PTT Technical Support
For Technical Support (help with using
the software, problems encountered
while using the software, communication
issues, etc.), please call 877-978-6586.
Parts and Service Support
For Parts and Service information needs
please visit our eMedia center on the
web at www.macktrucks.com.
Special Texts
The driver’s manual uses the following
levels of observation and warning texts.
DANGER
Indicates a potentially dangerous situation
that, unless avoided, will lead to death or
serious personal injury.
WARNING
Indicates a potentially dangerous situation
that, unless avoided, may lead to fatal
injury, serious personal injury or damage
to the product.
CAUTION
Indicates a potentially dangerous situation
that unless avoided may lead to minor or
moderate personal injury or damage to the
product.
NOTE
Indicates a situation, use or circumstance
that should be emphasized.
Menu Text
When the text refers to any of the menus
the search path is shown in a table.
Driver Information Display
Main menu 1
Submenu 2
Submenu 3
Tell-Tales
A tell-tale is a display that indicates the
actuation of a device, a correct or
defective condition, or a failure to
function. The operator should become
familiar with these symbols in order to
2
X Publication_PC28
To Next Page
Loading...
