EasyManua.ls Logo

Mack M359 - Left Rear Trailer Wheels Area; Left Side of Trailer Area

Mack M359
332 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAINTENANCE, LUBRICATION AND SERVICE
PRE-TRIP INSPECTION QUICK LIST
Rear doors securely closed,
latched or locked; required
security seals in place.
Underside guard in place: not
cracked, bent or broken.
14
Left Rear Trailer Wheels Area
Dual Wheels, One or Two Axles
Check condition of wheels and
rims. Especially look for cracks,
lockrings missing, bent or broken
spacers, studs, missing clamps
or lug nuts.
Check condition of tires: properly
inated, no serious cuts, bulges,
tread wear or any signs of
misalignment; valve stems not
touching wheels, rims or brake
drums; valve caps in place and
no objects stuck between the
wheels.
Check that both tires are of same
type, for example, not mixed
radial and bias type and that their
circumferences are matched.
Check wheel bearing and hub:
no obvious leaking on outside or
inside wheel.
Suspension
Condition of springs (leaf or air),
spring hangers, shackles and u-
bolts.
Axle alignment.
Condition of torque rod arms.
If equipped with sliding axles,
check position and alignment.
Look for damaged, worn or
missing parts, all locks present,
fully in place and locked.
Flexible air tubing not cracked,
cut, crimped or otherwise
damaged. It should be secured
against tangling, dragging and
chang.
Brakes
Condition of brake drums. With
brakes released, look for a
noticeable gap between lining
and drum. This check can not be
made if dust covers are in place.
Condition of brake hoses: check
for any chang.
Check brake chamber mounting
bolts and brackets.
Check slack adjusters and
chamber push rod travel. With
brakes applied or released, look
for conspicuously different
positions of the slack adjusters.
Check spring brakes.
15
Left Side of Trailer Area
Landing Gear or Dolly Area
Fully raised; no missing or
damaged parts.
Crank handle present and
secured.
If power operated, no air/
hydraulic leaks.
Spare Wheel(s)
Spare wheel securely mounted in
rack with no damage to rack.
Tire and wheel condition
adequate for a spare: proper
size, properly inated.
Lights and Reectors
Trailer side clearance lights:
clean, operating and proper
color.
Reectors clean and proper
color.
Frame and Body
Frame and crossmembers not
bent, cracked, damaged or
missing.
Proper placarding.
Body parts not damaged or
missing.
Before Leaving the Parking Area
Remove chocks from the wheels.
231
X Publication_PC28

Table of Contents

Related product manuals