EasyManua.ls Logo

Mack M359 - Fifth Wheel or Trailer Hitch; Hook-Up Preparation; Hooking up to Trailer; Sliding Fifth Wheel

Mack M359
332 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAINTENANCE, LUBRICATION AND SERVICE
PRE-TRIP INSPECTION QUICK LIST
Check gauges and tell-tale light
function. See the Instruments
and Controls section.
Check function of low air
warning.
Check clutch function. If
equipped, check for clutch brake
function.
Check windshield wipers and
washers and horns, including
back-up alarm, if equipped.
Clean inside windshield, door
windows and instruments. Clean
mirrors.
Check temperature control and
defroster. If equipped, check
mirror heater.
Check condition of warning
triangles, re extinguisher and
ares.
Adjust the seat. Check mirror
adjustment.
Check safety belts for function
and damage.
Apply service brakes. After initial
drop, pressure should hold
steady, or increase slightly, with
engine at idle.
Check steering wheel for
excessive free play.
Check for loose items in the cab.
Secure them if necessary.
Hooking Up To Trailer
Hook-Up Preparation
Check kingpin and mounting
plate on trailer, free from wear,
bends or damage.
Chock trailer wheels.
Fifth Wheel or Trailer Hitch
No visible space between fth
wheel and trailer.
Locking jaws around the shank
and not the head of kingpin.
Release lever properly seated
and safety latch/lock engaged.
Check all connections to dolly or
trailer hitch and safety chains are
secured.
Check function of trailer air
supply valve and trailer brakes.
Sliding Fifth Wheel
Check that fth wheel is not so
far forward that the tractor frame
will strike the landing gear during
turns.
10
Trailer Front Area
Air and Electrical Connections
Glad hands properly mounted,
free from damage and not
leaking.
Trailer cord receptacle properly
mounted, free of damage; plug
properly seated and safety catch
engaged to prevent accidental
disconnect.
Air and electrical lines properly
secured against tangling,
snagging and chang with
sufcient slack for turns.
NOTE
Refer to the trailer manufacturer's manual
for specic information on the trailer
checks.
11
Right Side of Trailer Area
Landing Gear or Dolly Area
Fully raised; no missing or
damaged parts.
Crank handle present and
secured.
If power operated, no air/
hydraulic leaks.
Spare Wheel(s)
Carrier or rack not damaged.
Spare wheel securely mounted in
rack.
229
X Publication_PC28

Table of Contents

Related product manuals