Mack M359 - Oil Capacity Table and Viscosity Charts; Oil Fill Capacity

MAINTENANCE, LUBRICATION AND SERVICE
OIL CAPACITY TABLE AND VISCOSITY CHARTS
NOTE
Use the information in the table below to
determine the operating condition and
usage applicable to your vehicle.
Oil Fill Capacity
Filter
Volume
Pan
Volume
Oil Change
Fill
11L
Steel
6 liters (6
quarts)
30 liters (32
quarts)
36 liters (38
quarts)
NOTE
Check the dipstick and top-off as needed.
Oil Viscosity
The viscosity grade denes the
thickness of the oil. The oil must be thin
enough at low temperatures for easy
cold starts and thick enough to protect
at high temperatures. An oil is not fully
dened until both the API quality
classication and the viscosity grade are
specied.
Choose the viscosity grade for the
typical ambient temperature for the
application. Multigrade oils have a broad
range that suit operation in changing
temperature. The standard oil weight for
Mack® engines is 10W/30.
Mack® recommends the viscosities
shown in the viscosity/temperature table
for Mack® engines.
249
X Publication_PC28