MAINTENANCE, LUBRICATION AND SERVICE
CAB MAINTENANCE
Hood Locks
The hood locks mechanism should be
greased with lithium NLGL2 every
160934 Km (100,000 mi). If the
mechanism is hard to work or binds, the
latch should be cleaned before greasing.
1 Apply Grease
Rust Protection
The rust protection applied when the
cab was produced is adequate for
normal use and service. If an extension
of the cab rust protection is desired or if
the vehicle is used in a severe
application, it is recommended that
cavity wax is re-applied every 3rd year.
293
X Publication_PC28
To Next Page
Loading...
