IMPULSE•G+ Mini Advanced Instruction Manual – March 2014
5-12
Fast Stop (H01.xx = 40 or 42)
Figure 5-11: H01.XX = 40 or 42 (Fast Stop) without DC Injection
Figure 5-12: H01.XX = 40 or 42 (Fast Stop) with DC Injection
Motor Rotation Change
This parameter allows you to change the motor direction without changing the motor leads.
Parameter
Code Name Function Range
Initial
Value
Access
Level
B03.04 Reverse Oper Reverse motor direction 00–01 00 Adv
00 Normal Rotation
01 Exchange Phases
To Next Page
Loading...
