Manitowoc 16000 Operator's Manual

Reference Only
OPERATING CONTROLS AND PROCEDURES 16000 OPERATOR MANUAL
3-30
Published 05-09-17, Control # 011-29
SEAT CONTROLS
CAUTION
Avoid Damage!
Disconnect electric cord from rear of left
console before you remove seat from
operator’s cab.
ARMREST
Turn knob clockwise to raise armrest or
counterclockwise to lower armrest.
BACKREST
• Move switch up to release backrest.
• Use body weight to adjust backrest.
•
Release switch to lock position of
backrest
.
SEAT FORE-AFT
• Push lever to left to unlock.
• Use body weight to slide seat to desired position.
• Release lever and make sure it is latched to lock
seat in position.
FIGURE 3-15
P1743
SEAT HEIGHT AND POSITION
• Move rear switch up or down to raise
or lower seat rear.
• Move center switch to raise/lower seat
and move it forward/backward.
• Move front switch up or down to raise
or lower seat front.
P1708a
Left Side of Seat
Under Armrest
WARNING
Moving Load Hazard!
Operator, be aware that backrest is spring
loaded. If you get out of seat to adjust
backrest, it will spring forward.
To prevent backrest from springing forward
into control handles and activating crane
functions, park all crane functions before
getting out of seat.

Manitowoc 16000 Specifications

General

Brand	Manitowoc
Model	16000
Category	Construction Equipment
Language	English