Manitowoc 16000 Operator's Manual

Reference Only
Manitowoc Published 05-09-17, Control # 011-29 1-1
16000 OPERATOR MANUAL INTRODUCTION
1
SECTION 1
INTRODUCTION
CRANE DATA
See end of this section for crane data specific to your crane:
• Basic Specifications
• EC Declaration (if applicable)
CRANE/ATTACHMENT IDENTIFICATION
An identification plate is attached to the outside of the
operator’s cab (see Figure 1-1
) and to the attachments (for
example, luffing jib and MAX-ER
®
).
The crane or attachment model and serial number are
provided on the plate.
For the exact location of the identification labels on your
crane and attachments, refer to the Nameplates and Decals
Drawing in Section 2 of this manual.
CHANGE OF OWNERSHIP REGISTRATION
If you are the new owner of a Manitowoc crane, please
register it with Manitowoc Crane Care so we can contact you
if the need arises.
1. Go to www.manitowoccranes.com
2. Go to Service > Manitowoc Crane Care > Service
Information > Change of Ownership Form.
3. Complete the form.
MANITOWOC DEALER
For questions about this manual or the 16000 crane, contact
your Manitowoc dealer. If you do not know the contact
information for your dealer, locate the Manitowoc dealer
nearest you, as follows:
1. Go to www.manitowoccranes.com
2. Go to Dealer Locator.
3. Follow the on-screen prompts to locate your Manitowoc
dealer.
CRANE ORIENTATION
The terms RIGHT, LEFT, FRONT, REAR used in this manual
refer to operator’s right, left, front, and rear sides when
seated in the operator’s cab looking forward.
• The boom is on the front of the rotating bed.
• The carbody and crawler controls are on the front of the
carbody.
FIGURE 1-1
Serial
Number
Model
Number
16001000
16000

Manitowoc 16000 Specifications

General

Brand	Manitowoc
Model	16000
Category	Construction Equipment
Language	English