Manitowoc Grove RT9150E User Manual

3-55
RT9150E OPERATOR MANUAL OPERATING CONTROLS AND PROCEDURES
3
Published 2-23-2017, Control # 644-00
Grove
6
Operating hours
submenu, F6
The operating hours are displayed
below the symbols, e.g. 1,680 hours
and 12 minutes for the telescoping
mechanism (3).
Exception: The value below symbol
(6) indicates how often the Telescopic
Section Lock has been operated, e.g.
13,750 times.
(1) ECOS
(2) Auxiliary systems:
Counterweight cylinders
Crane cab cylinder
(3) Telescoping mechanism
(4) Engine operation
(5) Lift cylinder
(6) Telescope locking system
(7) Main hoist
(8) Auxiliary hoist
(9) Swing gear
(10)Boom extension
Refer to Operating Hours, page 3-59
for more information on this submenu.
7
Critical load control,
on/off, F7
The critical load control prevents the
engine from stalling at high power
requirements.
ECOS registers the currently available
motor output and the hydraulic
performance currently required by the
power units.
If the required hydraulic performance is
above the current motor output (e.g.
when conducting an additional crane
movement), the critical load control
automatically reduces the hydraulic
performance of the power units.
The swing gear is not influenced by the
critical load control.
The critical load control is switched on
together with the ignition. You should
only switch off the critical load control if
it is faulty (engine stalls or individual
power units can no longer be
controlled).
• Switching off: press button F7 until
the dot turns black
• Switching on: press F7 button (1)
until the dot (2) turns green.
Item Description Graphic Explanation
Reference Only

Manitowoc Grove RT9150E Specifications

General

Brand	Manitowoc
Model	Grove RT9150E
Category	Construction Equipment
Language	English