Saving & Exporting
F6 SMART™ – Volumetric Handheld Camera – User Guide
Appendix 4 Certifications
The F6 SMART™ Camera is certified to the following standards:
EN 55032: 2012 + AC/2013 –
Class A
EN 55032: 2015
Electromagnetic Compatibility of multimedia
equipment – Emissions requirements. (2015).
Certificate No. 9712312196
Electromagnetic Compatibility of multimedia
equipment – Emissions requirements Ed. 2.0 (2015).
Information technology equipment – Immunity
characteristics – Limits and methods of
measurement (2010 + A1:2015).
Electromagnetic Compatibility (EMC); Part 3. Limits
Section 2. “Limit for harmonic current emissions
(equipment input current ≤ 16A per phase” (2014).
Section 3. “Limitations of voltage changes, voltage
fluctuations and flicker in public low-voltage supply
systems, for equipment with rated current < 16A per
phase and not subjected to conditional connection”
(2013).
“Rules and Regulations”: Part 15. “Radio frequency
devices”, Subpart B: Unintentional radiators (2015).
VCCI-CISPR 32: 2016 – Class A
IEC 60950-1:2005 (2
nd
ed.) +
Am 1:2009 + Am 2:2013 and
EN 60950-1:2006 (2
nd
ed.) +
Am: 11:2009 + Am 1:2010 +
Am 12:2011 + 2:2013.
Information technology equipment – Safety – Part 1:
General requirements.
Table 4 – F6 SMART™ Certifications
Certification reports attached below: